Home Assistant Core Integration
The Home Assistant integration provides generic implementations like the generic homeassistant.turn_on
.
Services
The homeassistant
integration provides services for controlling Home Assistant itself, as well as generic controls for any entity.
Service homeassistant.check_config
Reads the configuration files and checks them for correctness, but does not load them into Home Assistant. Creates a persistent notification and log entry if errors are found.
Service homeassistant.reload_all
Reload all YAML configuration that can be reloaded without restarting Home Assistant.
It calls the reload
service on all domains that have it available. Additionally,
it reloads the core configuration (equivalent to calling
homeassistant.reload_core_config
), themes (frontend.reload_themes
), and custom Jinja (homeassistant.reload_custom_templates
).
Prior to reloading, a basic configuration check is performed. If that fails, the reload will not be performed and will raise an error.
Service homeassistant.reload_custom_templates
Reload all Jinja templates in the config/custom_templates
directory. Changes to these templates
will take effect the next time an importing template is rendered.
Service homeassistant.reload_config_entry
Reloads an integration config entry.
Service data attribute | Description |
---|---|
entity_id |
List of entity ids used to reference a config entry. |
area_id |
List of area ids used to reference a config entry. |
device_id |
List of device ids used to reference a config entry. |
entry_id |
A single config entry id used to reference a config entry. |
Service homeassistant.reload_core_config
Reloads the core configuration under homeassistant:
and all linked files. Once loaded the new configuration is applied. New customize:
information will be applied the next time the state of the entity gets updated.
Service homeassistant.restart
Restarts the Home Assistant instance (also reloading the configuration on start).
This will also do a configuration check before doing a restart. If the configuration check fails then Home Assistant will not be restarted, instead a persistent notification with the ID persistent_notification.homeassistant_check_config
will be created. The logs will show details on what failed the configuration check.
Service homeassistant.stop
Stops the Home Assistant instance. Home Assistant must be restarted from the Host device to run again.
Service homeassistant.set_location
Update the location of the Home Assistant default zone (usually “Home”).
Service data attribute | Optional | Description |
---|---|---|
latitude |
no | Latitude of your location. |
longitude |
no | Longitude of your location. |
elevation |
yes | Elevation of your location. |
Example
action:
service: homeassistant.set_location
data:
latitude: 32.87336
longitude: 117.22743
elevation: 120
Service homeassistant.toggle
Generic service to toggle devices on/off. Same usage as the
light.toggle
, switch.toggle
, etc. services. The difference with this
service compared the others, is that is can be used to mix different domains,
for example, a light and a switch can be toggled in a single service call.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | The entity_id of the device to toggle on/off. |
Example
action:
service: homeassistant.toggle
target:
entity_id:
- light.living_room
- switch.tv
Service homeassistant.turn_on
Generic service to toggle devices on. Same usage as the
light.turn_on
, switch.turn_on
, etc. services. The difference with this
service compared the others, is that is can be used to mix different domains,
for example, a light and a switch can be turned on in a single service call.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | The entity_id of the device to turn on. |
Example
action:
service: homeassistant.turn_on
target:
entity_id:
- light.living_room
- switch.tv
Service homeassistant.turn_off
Generic service to toggle devices off. Same usage as the
light.turn_off
, switch.turn_off
, etc. services. The difference with this
service compared the others, is that is can be used to mix different domains,
for example, a light and a switch can be turned off in a single service call.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
yes | The entity_id of the device to turn off. |
Example
action:
service: homeassistant.turn_off
target:
entity_id:
- light.living_room
- switch.tv
Service homeassistant.update_entity
Force one or more entities to update its data rather than wait for the next scheduled update.
Service data attribute | Optional | Description |
---|---|---|
entity_id |
no | One or multiple entity_ids to update. It can be a list. |
Example
action:
service: homeassistant.update_entity
target:
entity_id:
- light.living_room
- switch.coffe_pot
Service homeassistant.save_persistent_states
Save the persistent states (for entities derived from RestoreEntity) immediately. Maintain the normal periodic saving interval.
Normally these states are saved at startup, every 15 minutes and at shutdown.