Compatible Zigbee Works with Home Assistant and Zigbee2MQTT1
Reliable Range +20 dBm
Future Proof Updatable Updates delivered via Home Assistant
Zero Setup Plug and Play Automatically detected by Home Assistant

Concurrent Zigbee and Thread on a single chip

Out of the box the Home Assistant SkyConnect will support only Zigbee. We're working on a firmware update that makes it possible to run both Zigbee and Thread at the same time. Thread is the mesh networking protocol that powers Matter, the new standard for smart home devices.

Once available, Home Assistant SkyConnect will run part of the software that normally runs inside Zigbee and Thread chips inside Home Assistant add-ons. These add-ons will be installed and updated automatically without requiring user interaction.

We will make this multi-protocol set-up first available for Home Assistant OS installations. We will be looking into making this available for Home Assistant Supervised and Home Assistant Container installations afterwards.

Specifications

Product details

Model No.
HASKYCNCT
Radio Chipset
Silicon Labs Multiprotocol EFR32MG21
Frequency
2.4 GHz
TX Power
up to +20 dBm
Protocols
Zigbee 3.0;
Thread (Matter) via firmware update
USB
2.0 full-speed, Silicon Labs CP2102N USB-to-UART bridge
Supply
5 V DC / up to 150 mA

Form Factor

Width
18 mm / 0.7 inch
Height
4.5 mm / 0.18 inch
Depth
38.5 mm / 1.5 inch
Weight
4 g / 0.14 oz

FAQs

1: Relies on the experimental EmberZNet support in Zigbee2MQTT.
ORDER