Balboa Spa Client
This integration adds support for Balboa Spa WiFi Modules to be used within Home Assistant.
There is currently support for the following device types within Home Assistant:
- Binary Sensor (Filter cycles and circulation pumps)
- Climate
Compatible hardware
Balboa Spa Client integration support local control of hot tub spas equipped with a Balboa BP system and a bwa™ Wi-Fi Module (50350).
Balboa Spa Client integration is not compatible with ControlMySpa™ cloud API used by Balboa ControlMySpa Gateway Ultra (59303).
Configuration
To add the Balboa Spa Client integration to your Home Assistant instance, use this My button:
If the above My button doesn’t work, you can also perform the following steps manually:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select Balboa Spa Client.
-
Follow the instructions on screen to complete the setup.
Options
Options for Balboa Spa Client can be set via the user interface, by taking the following steps:
- Browse to your Home Assistant instance.
- Go to Settings > Devices & Services.
- If multiple instances of Balboa Spa Client are configured, choose the instance you want to configure.
- Select the integration, then select Configure.
Known limitations
- The WiFi Module is a direct connection to the control panel of the spa. Certain combinations of settings are not possible due to limitations of the spa.
- Turning on certain pumps, depending on the spa configuration, may cause other pumps to come online as well.
- The spa WiFi Module will need to be configured initially by the phone app to authenticate and get an IP on your network.
- The WiFi Module will automatically disconnect from Home Assistant periodically, and then be automatically reconnected. The disconnect is built-in to the hardware.
Debugging integration
If you have problems with Balboa or the integration you can add debug prints to the log.
logger:
default: info
logs:
pybalboa: debug
homeassistant.components.balboa: debug