Home Assistant

IFTTT Alarm Control Panel

The ifttt platform allows you to integrate security systems that have no open API but can be controlled through IFTTT.

This platform depends on the IFTTT Home Assistant integration. See the integrations documentation to set it up.

It is important to note that this platform fully relies on IFTTT to receive updates when the security system's state changes. Therefore, this platform shows an assumed state.

Configuration

To enable this, add the following lines to your configuration.yaml file:

# Example configuration.yaml entry
ifttt:
  key: YOUR_WEBHOOK_KEY

alarm_control_panel:
  - platform: ifttt
    name: YOUR_ALARM_NAME
    code: YOUR_ALARM_CODE
    event_arm_away: YOUR_ARM_AWAY_EVENT
    event_arm_home: YOUR_ARM_HOME_EVENT
    event_arm_night: YOUR_ARM_NIGHT_EVENT
    event_disarm: YOUR_DISARM_EVENT

Configuration Variables

Looking for your configuration file?
name string (Optional)

The name of your Home Assistant alarm control panel.

code string (Optional)

The code for the alarm control panel.

code_arm_required boolean (Optional, default: true)

If true, the code is required to arm the alarm.

event_arm_away string (Optional, default: alarm_arm_away)

IFTTT webhook event to call when the state is set to armed away.

event_arm_home string (Optional, default: alarm_arm_home)

IFTTT webhook event to call when the state is set to armed home.

event_arm_night string (Optional, default: alarm_arm_night)

IFTTT webhook event to call when the state is set to armed night.

event_disarm string (Optional, default: alarm_disarm)

IFTTT webhook event to call when the state is set to disarmed.

optimistic boolean (Optional, default: false)

Specify if the state will be updated by an ifttt.push_alarm_state call (false) or can be set immediately (true).

It is strongly discouraged to use this platform when you don’t use encryption; otherwise, your API password will be send unprotected through the IFTTT Webhooks. It is advised to setup encryption using Let’s Encrypt.

Required IFTTT applets

Next, you will need to set up the required IFTTT applets as listed below.

This platform supports the services alarm_disarm, alarm_arm_away, alarm_arm_home and alarm_arm_night. For each of these services, an IFTTT webhook will be triggered.

For this system to operate correctly, the following IFTTT applets have to be setup. Obviously, if your alarm device does not support some states, no applets have to be provided for those.

  • IF Webhook event YOUR_DISARM_EVENT is called, THEN disarm the alarm system.
  • IF Webhook event YOUR_ARM_HOME_EVENT is called, THEN set the alarm system to armed home.
  • IF Webhook event YOUR_ARM_NIGHT_EVENT is called, THEN set the alarm system to armed away.
  • IF Webhook event YOUR_DISARM_EVENT is called, THEN set the alarm system to armed night.
  • IF the alarm system was disarmed, THEN perform a Webhook POST web request to URL https://HASS_URL/api/services/ifttt/push_alarm_state?api_password=API_PASSWORD with content type application/json and body {"entity_id": "alarm_control_panel.DEVICE_NAME", "state": "disarmed"}.
  • IF the alarm system state changed to armed home, THEN perform a Webhook POST web request to URL https://HASS_URL/api/services/ifttt/push_alarm_state?api_password=API_PASSWORD with content type application/json and body {"entity_id": "alarm_control_panel.DEVICE_NAME", "state": "armed_home"}.
  • IF the alarm system state changed to armed away, THEN perform a Webhook POST web request to URL https://HASS_URL/api/services/ifttt/push_alarm_state?api_password=API_PASSWORD with content type application/json and body {"entity_id": "alarm_control_panel.DEVICE_NAME", "state": "armed_away"}.
  • IF the alarm system state changed to armed night, THEN perform a Webhook POST web request to URL https://HASS_URL/api/services/ifttt/push_alarm_state?api_password=API_PASSWORD with content type application/json and body {"entity_id": "alarm_control_panel.DEVICE_NAME", "state": "armed_night"}.