NuHeat
The nuheat integration lets control your connected NuHeat Signature floor heating thermostats from NuHeat.
There is currently support for the following device types within Home Assistant:
- Climate
Prerequisites
First, you will need to obtain your thermostat’s numeric serial number or ID by logging into MyNuHeat.com and selecting your thermostat(s).
Configuration
To add the NuHeat integration to your Home Assistant instance, use this My button:
NuHeat can be auto-discovered by Home Assistant. If an instance was found, it will be shown as Discovered. You can then set it up right away.
If it wasn’t discovered automatically, don’t worry! You can set up a manual integration entry:
-
Browse to your Home Assistant instance.
-
In the bottom right corner, select the Add Integration button.
-
From the list, select NuHeat.
-
Follow the instructions on screen to complete the setup.
Concepts
The NuHeat Thermostat supports the following key concepts.
The target temperature is the temperature that the device attempts to achieve. The target temperature is either determined by the schedule programmed into the thermostat (auto mode) or may be overridden. When the target temperature is set by Home Assistant, the thermostat will hold this temperature until the schedule is resumed.
Attributes
The following attributes are provided by the NuHeat thermostat: name, temperature_unit, current_temperature, target_temperature, current_hold_mode, current_operation, operation_list, min_temp and max_temp.
Attribute name
Returns the name of the NuHeat Thermostat.
| Attribute type | Description |
|---|---|
| String | Name of the thermostat |
Attribute temperature_unit
Returns the unit of measurement used for temperature by the thermostat.
| Attribute type | Description |
|---|---|
| String | Name of the temperature unit |
Attribute current_temperature
Returns the current temperature measured by the thermostat.
| Attribute type | Description |
|---|---|
| Integer | Currently measured temperature |
Attribute target_temperature
Returns the target temperature of the thermostat, when the thermostat is not in auto operation mode.
| Attribute type | Description |
|---|---|
| Integer | Target temperature |
Attribute preset_mode
Returns the current temperature hold, if any.
| Attribute type | Description |
|---|---|
| String | ‘temperature’, ‘temporary_temperature’, ‘auto’, etc. |
Attribute hvac_action
Returns the current HVAC mode of the thermostat.
| Attribute type | Description |
|---|---|
| String | ‘heat’, ‘idle’ |
Attribute preset_modes
Returns the list of available preset modes.
| Attribute type | Description |
|---|---|
| List of String | Available preset modes |
Attribute min_temp
Returns the minimum supported temperature by the thermostat
| Attribute type | Description |
|---|---|
| Integer | Minimum supported temperature |
Attribute max_temp
Returns the maximum supported temperature by the thermostat
| Attribute type | Description |
|---|---|
| Integer | Maximum supported temperature |
Services
The following services are provided by the NuHeat Thermostat: set_temperature, set_hvac_mode, set_preset_mode.
Service climate.set_hvac_mode (Climate integration)
NuHeat Thermostats do not have an off concept. Setting the temperature to min_temp and changing the mode to heat will cause the device to enter a Permanent Hold preset and will stop the thermostat from turning on unless you happen to live in a freezing climate.
Service climate.set_temperature (Climate integration)
If the thermostat is in auto mode, it puts the thermostat into a temporary hold at the given temperature.
If the thermostat is in heat mode, it puts the thermostat into a permanent hold at the given temperature.
Service climate.set_preset_mode (Climate integration)
The following presets are available: Run Schedule, Temporary Hold, Permanent Hold.