Number
Keeps track on number
entities in your environment, their state, and allows you to control them. This integration allows other integrations to get a value input from user within a range.
Building block integration
The number integration cannot be directly used. You cannot create your own number entities using this integration. This integration is a building block for other integrations to use, enabling them to create number entities for you.
If you are looking for a way to create a number entity, please take a look at the Number helper.
Device Class
The type of data a number represents impacts how it is displayed in the frontend. This is controlled by the number’s device class designation. Built-in numbers and many created from an integration will have this designation predefined. Those can be modified in the customize section. When manually creating a new number the device class may be optionally assigned. A full list of available number device classes is below:
- None: Generic number. This is the default and doesn’t need to be set.
- apparent_power: Apparent power in VA.
- aqi: Air Quality Index (unitless).
- atmospheric_pressure: Atmospheric pressure in cbar, bar, hPa, inHg, kPa, mbar, Pa, psi
- battery: Percentage of battery that is left
- carbon_dioxide: Carbon Dioxide in CO2 (Smoke)
- carbon_monoxide: Carbon Monoxide in CO (Gas CNG/LPG)
- current: Current in A, mA
- data_rate: Data rate in bit/s, kbit/s, Mbit/s, Gbit/s, B/s, kB/s, MB/s, GB/s, KiB/s, MiB/s, or GiB/s
- data_size: Data size in bit, kbit, Mbit, Gbit, B, kB, MB, GB, TB, PB, EB, ZB, YB, KiB, MiB, GiB, TiB, PiB, EiB, ZiB, or YiB
- distance: Generic distance in km, m, cm, mm, mi, yd, or in
- energy: Energy in Wh, kWh, MWh, MJ, or GJ
- energy_storage: Stored energy in Wh, kWh, MWh, MJ, or GJ
- frequency: Frequency in Hz, kHz, MHz, or GHz
- gas: Gasvolume in m³, ft³, or CCF
- humidity: Percentage of humidity in the air
- illuminance: The current light level in lx
- irradiance: Irradiance in W/m² or BTU/(h⋅ft²)
- moisture: Percentage of water in a substance
- monetary: The monetary value
- nitrogen_dioxide: Concentration of Nitrogen Dioxide in µg/m³
- nitrogen_monoxide: Concentration of Nitrogen Monoxide in µg/m³
- nitrous_oxide: Concentration of Nitrous Oxide in µg/m³
- ozone: Concentration of Ozone in µg/m³
- ph: Potential hydrogen (pH) value of a water solution
- pm1: Concentration of particulate matter less than 1 micrometer in µg/m³
- pm10: Concentration of particulate matter less than 10 micrometers in µg/m³
- pm25: Concentration of particulate matter less than 2.5 micrometers in µg/m³
-
power_factor: Power factor(unitless), unit may be
None
or % - power: Power in W or kW
- precipitation: Accumulated precipitation in cm, in or mm
- precipitation_intensity: Precipitation intensity in in/d, in/h, mm/d, or mm/h
- pressure: Pressure in Pa, kPa, hPa, bar, cbar, mbar, mmHg, inHg, or psi
- reactive_power: Reactive power in var
- signal_strength: Signal strength in dB or dBm
- sound_pressure: Sound pressure in dB or dBA
- speed: Generic speed in ft/s, in/d, in/h, km/h, kn, m/s, mph, or mm/d
- sulphur_dioxide: Concentration of sulphur dioxide in µg/m³
- temperature: Temperature in °C, °F or K
- volatile_organic_compounds: Concentration of volatile organic compounds in µg/m³
- voltage: Voltage in V, mV
- volume: Generic volume in L, mL, gal, fl. oz., m³, ft³, or CCF
- volume_storage: Generic stored volume in L, mL, gal, fl. oz., m³, ft³, or CCF
- water: Water consumption in L, gal, m³, ft³, or CCF
- weight: Generic mass in kg, g, mg, µg, oz, lb, or st
- wind_speed: Wind speed in ft/s, km/h, kn, m/s, or mph
Services
The Number entities registers the following services:
Service | Data | Description |
---|---|---|
set_value |
value entity_id(s) area_id(s)
|
Set the value of specific number entities |