Panasonic Viera

The Panasonic Viera integration allows you to control a Panasonic Viera TV.

There is currently support for the following device types within Home Assistant:


To add the Panasonic Viera integration to your Home Assistant instance, use this My button:

If your TV needs to be paired, you will be prompted to type the PIN code that will be displayed on it.

To allow your TV to be turned on or controlled while off, enable Powered On By Apps in your settings (if available): Network > TV Remote App Settings

Manual configuration

If you prefer to use YAML to set up your Panasonic Viera TV, you can still do it. It also allows for some extra settings.

# Example configuration.yaml entry
  host: YOUR_TV_IP

Configuration Variables

host string Required

The IP address of your Panasonic Viera TV, e.g.,

name string (Optional, default: Panasonic Viera TV)

The name you would like to give to the TV entity.

port integer (Optional, default: 55000)

The port number of your Panasonic Viera TV.

turn_on_action list (Optional)

Defines an action to turn the TV on. If not specified, a power key signal will try to be sent to the TV. Be aware that it might not work properly with some models.

When you restart Home Assistant, make sure the TV is turned on and connected to your local network. If your TV needs to be paired, you’ll need to go to Settings > Devices & Services to type the PIN code that will be displayed on it and finish the setup.

Example turn_on_action

This example uses a turn_on_action, to turn on the TV using a magic wake on LAN packet. This example requires the Wake on LAN integration to be set up.

# Example turn_on_action configuration.yaml entry with Wake-on-LAN
  host: YOUR_TV_IP
  name: Living Room TV
    - service: wake_on_lan.send_magic_packet
        mac: "AA:BB:CC:DD:99:1A"

Example play_media script

The play_media function can be used to open web pages and other media types (images, movies) via URLs in the TV web browser.

# Example play_media script
    alias: "Show who's at the door"
      - service: media_player.turn_on
          entity_id: media_player.living_room_tv
      - service: media_player.play_media
          entity_id: media_player.living_room_tv
          media_content_type: "url"
          media_content_id: YOUR_URL
      - delay:
        seconds: 5
      - service: media_player.media_stop
          entity_id: media_player.living_room_tv


When the integration is configured, two entities will be created: a media_player and a remote. The remote allows you to send key commands to your TV with the remote.send_command service.

Some of the known valid key values are:

  • up
  • down
  • left
  • right
  • enter
  • home
  • back
  • power

The list with all known valid keys can be found here. Additionally, you can also send custom commands, such as "NRC_HOME-ONOFF" (which is the same as home). Further undocumented commands are "NRC_HDMI1-ONOFF", "NRC_HDMI2-ONOFF", "NRC_HDMI3-ONOFF" and "NRC_HDMI4-ONOFF" for selecting HDMI inputs and "NRC_NETFLIX-ONOFF", "NRC_APPS-ONOFF", “NRC_MYAPP-ONOFF” for apps.

Currently known supported models

  • TC-P50ST50
  • TC-P55ST50
  • TC-P60S60
  • TC-P60ST50 (can’t power on)
  • TC-P65VT30
  • TH-32ES500
  • TH-P60ST50A (can’t power on)
  • TX-32AS520E
  • TX-32DSX609
  • TX-40CXE720
  • TX-40DX600
  • TX-40DX700B
  • TX-42AS650
  • TX-49DX650B
  • TX-50DX700B
  • TX-55ASM655
  • TX-55ASW654
  • TX-55CS630E (can’t power on)
  • TX-55CX680B
  • TX-55CX700E
  • TX-55EXW584
  • TX-55EXW604S
  • TX-55FX680W
  • TX-55FZ802B
  • TX-55JZ1000W
  • TX-58AX802B
  • TX-58DX700B
  • TX-58DX800E
  • TX-65CX800E
  • TX-65EXW784
  • TX-65FX720W
  • TX-L42ET50
  • TX-L47ET60E (can’t power on)
  • TX LF37E30 (can’t power on)
  • TX-P42STW50
  • TX-P42VT30E
  • TX-P50GT30Y
  • TX-P50GT60E
  • TX-65HZ1000W

If your model is not on the list, give it a test. If everything works correctly, then add it to the list on GitHub.